The process of Epoxy Grouting and Injection Grouting may sound very complex to you, however both are equally important and required in the segment of construction and buildings. Today talking about Injection Grouting only, it is mainly the process which fill the cracks and voids and open joints inside the concrete structural members where under the pressure with a certain material, it can cure in the place and also can produce the desired results which can thus strengthen the structure and also prevent the water movements too. Grout is mainly a flowable plastic material which has negligible shrinkage capacity and the main aim of grout is to mainly fill the gap or the void which is created and to make sure the stability without the delamination and crackling or crumbling of the concrete. There are many types of grouts which are fitted according to the consumer’s choice such as polymer-cement, epoxy, urethane, cement, high-molecular-weight methacrylate and more where the materials are carefully selected for a certain type of concrete which is highly work-based being heavy on the compatibility of the original material. Thus proper grouting material is not mainly selected but the desired objective of the process can also be achieved out of the blue.
However, only the epoxy grouting can be mixed with the gelling of th material, whereas the pressure injection becomes highly difficult, where batches are usually mixed with the process where the components of the epoxy are also mixed, but in a certain quantity where using a basic mechanical stirrer is on the loose with the paint mixing paddle. Coming to the more advanced mixing system, at times there are at least 2 liquid adhesive components on the loose which are thus passed via an automatic mixing head where after the row of pumping, the gun is released just before the motion. This system mainly allows the use of the fast setting of adhesives which have a short working life and after the injection of epoxy the project then parts the surface seal and is removed by grinding with certain appropriate means as well.
Now, the grouting procedures has the following steps, they are as follows:
- Drill ports
- Seal cracks between ports
- Cleaning ports and cracks
- Make grouting hose connections
- The final grouting process
Thus, the process of grouting is this started from one horizontal opening to the other going at the bottom of a vertical opening thus and is continued until the grouting starts to appear at the very next port with the surface seal to be cracked or bulge out where after the operation of grouting you can thus move ahead towards the next port.
Address: 801, Odyssey Road No. 9, Wagle Estate, Thane (West), Maharashtra-400604
Contact Number: 022-25801080.
